|
Features
1. Data display it shows the riding speed, a single mileage and cumulative mileage, riding time,
power-assist gear, battery voltage and charge status, brake status and other cycling parameters;
2. Intelligent power a true reflection of the battery charge, real-time recording of the power
consumption to ensure riding mileage;
3. Stalls settingmulti-gear switch and automatic save of the power-assist gear, and it can restore
power-off stall state when turned on;
4. Parameter setting with a number of user parameter setting functions, motor parameters, velocity
measurement parameters, speed-limit parameters, power parameters, power-assist control parameters,
the minimum controller voltage and maximum current parameters and other operating models for
settings adjustment ;
5. Data view Users can view historical driving data and clear accordingly, view single or cumulative
riding time, riding mileage, maximum speed and average speed of single riding;
6. Vehicle boosting With 6Km/h power-assisting functions, the boost logo flashes during
boosting, and riders can use it when driving the vehicle and the vehicle driving is labor-saving and easy;
7. Cruise and constant speed:With the setting and display of the cruise, achieving to
automatically maintain the vehicle speed, so that the vehicle drives at a constant speed;
8. Night driving With the functions of LCD backlit display and headlight switch control,
instrument backlighting and headlights can be turned on during driving at night;
9. Password setting With three-bit of power-on password setting;
10. Automatically prompt:For the appeared failure of the vehicle, it can prompt different fault
codes for easy inspection and maintenance of vehicle;
11. Use five-line of digital communication, the instrument has good compatibility and interchangeability,
different instruments can be conducted the data exchanges and parameters copy directly;
12. Supply voltage of 24V, 36V, 48V can be automatically identified and compatible;
13. Black housing;
KT-LCD5 E-Bike LCD Meter for KT Series Controllers. It only fits KT series controllers. It is not suitable for other controllers.
1. Dimension: 16.5X51X77mm
2. Voltage: fits for 24V, 36V or 48V batteries.
Note: How to determine the value of the parameter P5 ? The formula is LVC+P5/3.77.
For 24V battery, LVC=20V, P5/3.77=1.
For 36V battery, LVC=30V, P5/3.77=1.5.
For 48V battery, LVC=40V, P5/3.77=2.
You can adjust P5 parameter by your own battery discharge curve.
It is a smart LCD. You can not test it by only voltage. You need to install it on your E-Bike and pedal for 3-5 seconds. Then the LCD will show battery level normally.
The operation manual is same as KT-LCD5 except power and temperature display. You can follow the KT-LCD3 manual to operate the panel.
water proof Cable Length: 22cm+160cm=182cm
| 